Update your Ledger Nano S Plus to benefit from the optimal security level and user experience offered by our products. Updating your device has no impact on your crypto assets or the functionality of your device.
Before you start
- Update Ledger Live through the notification banner or download the latest version.
- Make sure your 24-word recovery phrase is available, as a precaution. Don’t have your recovery phrase?
- Applications on your device will be automatically reinstalled after the update.
Update Ledger Nano S Plus firmware
- In Ledger Live, click on Update firmware in the orange notification banner.
If you don't see the notification banner, please try again later as the release is rolled out progressively. - Carefully read all instructions on the window that appears.
- If your recovery phrase is written down and accessible, tick the checkbox at the bottom and click on Continue.
The update process normally does not require the recovery phrase, but you should have it available as a precaution. Don’t have your recovery phrase? - Your device will show New firmware and the version number.
- Press the right button to select Confirm update. Press both buttons to confirm.
- Enter your PIN code to confirm. Your device will then restart and install the update.
- Press the right button to select Confirm update. Press both buttons to confirm.
- The update process will continue automatically. Ledger Live will display multiple progress loaders, while your Ledger Nano S Plus displays Processing.
Your device is successfully updated once Ledger Live displays Firmware updated.
You've successfully updated your Ledger Nano S Plus firmware. Ledger Live will automatically reinstall apps on your device. You may notice an increase in app storage capacity.
Currently, only Android users can update the Ledger Nano S Plus firmware on a mobile device, and this requires a USB connection. Unfortunately, updating the device firmware on iOS is not possible due to constraints with the iPhone's Lightning port.
- Connect Ledger Nano S Plus to your smartphone using a USB cable.
- Open the Ledger Live app.
- In the bottom right corner of the screen, tap My Ledger. You’ll be taken to a page where you need to select your device.
- In the USB section, you should see your Ledger Nano S Plus. Tap it and confirm that you allow My Ledger to access your device.
- You’ll see a notification stating that a firmware update is available.
- Tap Update. A pop-up window with instructions will appear. Read the instructions carefully.
- Tick the checkbox at the bottom to confirm that you have your recovery phrase and tap Continue. Firmware updates don't usually require a recovery phrase, so this is simply a precaution. Don’t have your recovery phrase?
- Ledger Nano S Plus will display New firmware and version number.
- Select Confirm update by pressing the right button.
- Press both buttons simultaneously to confirm the update.
- Enter your PIN code.
The process is completed when Ledger Live displays Firmware updated.
Ledger Nano S Plus Firmware Version History
Below, you'll find a comprehensive list of all firmware versions available for the Ledger Nano S Plus.
| Ledger Nano S Plus firmware versions |
|---|
| 1.1.0 (latest firmware version) |
| 1.0.4 |
| 1.0.3 |
| 1.0.2 |
| 1.0.0 |