Update Ledger Nano S firmware

The update to firmware version 1.6.1 brings several user experience improvements and additional cryptographic support to the Ledger Nano S. Please read our blog post and the release notes for more details about this update. Check our troubleshooting article if you need help. 

This is a progressive release, please try again later if the update is not visible in the Manager.

Before you start

  • Update Ledger Live through the notification banner or download the latest version. The mobile app does not support firmware updates. 
  • Linux users: If your device currently has version 1.5.5, you must add new udev rules. Check the Linux section of this article for instructions. 
  • Firmware versions 1.1 and 1.2 cannot be updated with Ledger Live. Please check the firmware version before submitting a support request to get a replacement device. 

Video tutorial

Checking the firmware version

    1. Start Ledger Live and open the Manager.
    2. Click Manager on the main menu.
    3. Connect and unlock your device. If asked, allow the manager on your device.
    4. Check which firmware version is currently installed on your Ledger Nano S:

Screenshot_2020-08-06_at_10.49.29.png

Installing the firmware update

Depending on the firmware version currently installed on your device, select one of the following procedures:

Version 1.6.0 Version 1.5.5 Version older than 1.5.5
  1. In the Manager, click on the blue Update firmware button.
    If you don't see the button, please try again later as the release is rolled out progressively.


    Screenshot_2020-08-06_at_10.50.02.png
  2. Carefully read all instructions on the window that appears.
  3. If your recovery phrase is written down and accessible, tick the checkbox at the bottom and click on Continue. The update process normally does not require the recovery phrase, but you should have it available as a precaution. Don’t have your recovery phrase?

    Screenshot_2020-08-07_at_15.39.08.png

    The next screen will inform you that the apps will be automatically uninstalled before clicking on Continue. Don't worry, this does not affect your crypto assets, you can reinstall the apps later.
  4. Your device will show update firmware, the version number, and an Identifier.
    • Verify that the Identifier in Ledger Live matches the one on your Ledger Nano S.
      Update_firmware.png
    • Press both buttons to choose Perform update.
    • Enter your PIN code to confirm. Your device will restart.
  5. The update process will continue automatically. Ledger Live will display multiple progress loaders, while your Ledger Nano S displays Processing. Your device is successfully updated once Ledger Live displays Firmware updated.

Need help?

Please check our Update FAQ for troubleshooting tips.

After the update

  • You've successfully updated your Ledger Nano S firmware. Ledger Live will automatically re-install apps on your device. You may notice an increase in app storage capacity.

  • If your device displays Welcome to Ledger Nano S, it has been reset. Don't worry, your crypto assets are safe as long as you have your 24-word recovery phrase. Please follow the instructions to restore your private keys from your recovery phrase.

  • From now on, menu items are selected with the right or left button. Press both buttons simultaneously to validate a selection. 
    LNS160-select-and-validate.gif
Ledger Nano S Firmware update guide
Was this article helpful?
8747 out of 12363 found this helpful